Child Item

Dropbox and Transcend JetDrive Lite expansion cards

I was wondering if anyone had had any success storing their Dropbox folder on one of these expansion cards? I have one for my MacBook Pro and would love to keep a rather large Dropbox folder on there but when I try to I get an error message saying that some files can't be moved, please select a new location or close some files and try again. I have closed files and rebooted but still get the error. Might it help if I tried to reformat the JetDrive?

Find more posts tagged with

Setting Up the Apps

Desktop

Sync

Third Party Integrations

Spam

Insightful

Closed - Partially Delivered

Closed - Inactive

Accepted answers

Andy F.14

Hmm, not sure about that. I moved the whole Dropbox folder to the Transcend and once you format it and install a bit of software that mounts and unmounts the drive when putting the computer to sleep it all works really well.

All comments

Andy F.14

Think I may have solved this on my own. I reformatted the card to Mac OS (Journaled) and it all now works well.

Joe A.11

Hello Andy - I hope you won't mind answering a question. I too am considering a JetDrive card and am planning on permanently moving a couple of large folders with multiple files to it. I cannot figure out if once those files are moved to the JetDrive card can the files/folders of that card be set up to automatically sync to Dropbox just like all the other files/folders on my Macbook's hard drive?

If you have any insights and wouldn't mind sharing, it would be appreciated.

Andy F.14

Diego P.4

Hello...I am trying to change the original Dropbox directory to the Jetdrive but really don't know exactly how to do it? Can someone please give the right directions? Thanks in advance!

bodanique

Hi Andy, could you explain how you did this please? I just got a Transcend Jetdrive and formatted the card accordingly, but with Selective Sync the only folders that can be selected are the ones under my user folder (and the Jetdrive isn't one of them). I know it's an old topic, but I'm really stuck here. Thanks!

khcole

I just purchased a JetDrive yesterday. After formatting it, I needed to re-link my dropbox to the Transcend/JetDrive SD card. The selective sync only controls what syncs to your DropBox location, not what folder you use for DropBox. Go to Settings/preferences/Account and you will see an option to unlink your DropBox. Then re-link it to the JetDrive. DropBox will re-sync to that new location and then you can delete the old DropBox folder.

One thing about JetDrive that I have not gotten to work. When my MacBook Pro wakes from sleep, the operating system doesn't always mount the JetDrive before DropBox throws an error saying it can't see the folder location, causing DB to quit and then I have to re-launch DB (huge pain). Using the JetDrive settings hasn't fixed it either. I'll repost if I figure it out.

luckyprintschi

I'm hitting the same wall. I formatted the drive as per the instructions for the JetDrive Lite on my MBP 15' Retina. My company DB account was getting too big to keep on the original hard drive hence the expansion with JetDrive. However, upon waking the computer, it doens't always recognized the JetDrive and subsequently won't sync the DB account. I often have to remove and re-insert the JetDrive Lite disc which it meant to not be removed frequently.

Am I missing something in the formatting that may be causing this? Is it an issue with the JetDriveLite that another product doesn't have perhaps? I'm assuming it's something im doing/not doing...

khcole

I have solved this. I apologize for not posting my solution. You need to change your Mac's sleep/energy settings. Go to System Settings. Under Energy Saver, uncheck the option to put the hard drives to sleep when possible. Then, enable Power Nap. Do this under both the Battery and Power Adapter tabs. Also, on the JetDrive software (under JetDrive Lite) turn Power Save to "off". Changing these settings allows the Transcend to maintain a connection to the computer and not think it's been powered off.

I have noticed very little impact to my battery levels when leaving the MBP unplugged overnight and the Transcend card stays connected. If you need more assistance, please reply back.

luckyprintschi

Awesome! This is the first solution going this route I've seen and the only one that seems to have fixed all of the issues we were hitting.

I'll update if anything further happens.

Thanks for the tip!

@khcole wrote:
I have solved this. I apologize for not posting my solution. You need to change your Mac's sleep/energy settings. Go to System Settings. Under Energy Saver, uncheck the option to put the hard drives to sleep when possible. Then, enable Power Nap. Do this under both the Battery and Power Adapter tabs. Also, on the JetDrive software (under JetDrive Lite) turn Power Save to "off". Changing these settings allows the Transcend to maintain a connection to the computer and not think it's been powered off.

I have noticed very little impact to my battery levels when leaving the MBP unplugged overnight and the Transcend card stays connected. If you need more assistance, please reply back.

khcole

Great to hear! Thanks for letting me know it worked for you as well.

d_esk

Hi, I'm trying to understand where the option to turn Power Save off is located. I do not have any JetDrive software installed. Will this work without doing this?

luckyprintschi

The power save mode is located in the JetDrive Toolbox (should be able to download from the Transcend website.) The application runs in the background so it isn't intrusive in any way. I definitely recommend doing that. It worked like a charm after struggling for over a month to remedy the problem.

d_esk

Thanks! What exactly do all these settings do?

tatilove

Hi,

Q: I have changed the system energy saver preferences -- but I cannot figure out how to turn Power Save to "off" on the Jetdrive Lite -- since I cannot find that software anywhere and do not recall every installing it. Did you download that from somewhere?

It isn't working just with the system preferences changed, so I figure I need to also change it for the drive itself...

Thanks!

Natasha

khcole

Sorry for not replying earlier. You've probably found it by now. If not, here you go.

https://www.transcend-info.com/Support/No-638

I will say that this solution quit working for me a while back with a new MacOS update. I switched to BaseQi, which is working slightly better than the Transcend did after that OS update, but not perfectly like my Trascend used to.

tatilove

Thanks! I forget how but I DID get it to work back in May... I will file this away in case it stops working... Natasha